Setting up Intel Edison (with Intel XDK)


Intel Edison is a tiny computer for building compelling #inteliot hardware hacks. This is a quick intro on how to pair Edison with Intel XDK over a local network.

Getting Started Tips:

  • You will need Intel Edison + some kind of mounting board which allows you to SSH into the device / serial into the device to configure Wi-Fi capability
  • This will not work on many public networks (where Wi-Fi “Isolation Mode” is enabled). If isolation mode is turned on, you will not be able to use Bonjour Browser to detect the Edison once it is on the local network and you will not be able to pair it with XDK or SSH into it!
  • Download the Bonjour Browser, a utility for detecting Edison on the local network
  • Download and install Bloop, a tool I have written to automate many common command-line tasks with Edison

Setting Up XDK

Download Intel XDK IoT Edition. Once you install, register for an account and sign into XDK, you should see the following option available under the “New Projects” templates. Click the template to get started with a new Intel XDK project for IoT applications with Intel Edison.


Getting Edison on Wi-Fi

The instructions for getting Intel Edison on Wi-Fi are here. If you are on OSX, skip to these directions.

Pairing XDK with Edison

Assuming you have gotten Edison online we can now proceed to deploy code to XDK.

If you haven’t done so already, download the Bojour Browser, a utility for detecting other devices on your local network.

In your XDK project,  click the drop down and see if there is an “Edison” option listed. If not, open the Bojour Browser and find the IP address and port of your Edison. Then select input “Add Manual Connection” and input the Edison IP Address and Port information from the  Bonjour Browser (see below)

IOT Template

Dealing with Intel XDK Whitelist Warning


If you are getting the “Authorization Required(401)” warning from Intel XDK, you will need to perform the following steps:

  • Click the blue underlined text in the below dialog to reveal your current IP address (as below)
  • Open Terminal and type in “screen /dev/cu.usbserial” (Tab) to complete then add “115200 -L”
  • Once you have logged into your Edion via the Terminal, run the command:
    • xdi-whitelist –add” (that is two “-” symbols in front of “add”, not one)  (replace the IP address with the one you get from the below dialog)
    • Once you submit, you should get a message “ added to whitelist!”
  • You should now be able to run Node.js via Intel XDK IoT Edition by clicking the “Hammer” icon

Troubleshooting: If you are getting errors, check this guide.

#inteliot #makesoftware

Intel Galileo Gen 2 Mashery + Twilio Samples

Provided you have followed the instructions here to set up your Gen 2 Galileo with Node.js and XDK…

Download and unzip the following samples into a directory and, under the “Develop” tab, select “Open An Intel XDK Project” and import the below directory.

Screen Shot 2014-09-05 at 4.17.17 PM

Download Samples: Mashery Galileo XDK Samples

Next, assuming you have connected an Intel Galileo Gen 2 board and paired it with your XDK instance, you should be able to deploy the code to the board and then run it.

Each sample can be run by navigating to the directory containing your Node.js projects and going “node sampleXXX.js”

Evangelist Life

10629720_10102246024909962_7207961659356675563_n upload

Had a “small” shipment of maker devices come in the mail yesterday. And by small I mean it required a fork lift to move them.

Introducing Galileo-bot Mark II by + Jigsaw Renaissance

10593164_10102247430158832_694168629116453407_n 10606376_10102247430059032_5194471963794017233_n 10660191_10102247430103942_6100001694257884200_n

The team at Jigsaw Renaissance rose to the challenge of producing a more robust Hack-E-Bot implementation based on Intel Galileo Gen 2 and spent all night producing a new, ruggedized version which now has sonar for obstacle avoidance!

I will be demonstrating the v2 robot at Intel Developer Forum next week, thanks to Marty + Budi.

Galileo Gen 2 Setup For Mac OSX

Galileo Gen 2

Step 1: Acquire Gen 2 Galileo board + Necessary Cables

[Read more…]